Muratec MFX-2500 Istruzioni per gli Interventi Scaricare il pdf (Pagina 44)

Just in case …

2.7

Printouts have irregularities

• The paper you’re using may have absorbed moisture, per-

haps due either to high humidity or water having been

spilled on the paper supply.Toner will not adhere well to

wet paper.

Replace the paper with dry paper and try printing again.

Printouts have white and/or black lines

• The toner cartridge or drum cartridge may be defective.

Remove the cartridges and check them for damage.

If the problem persists, replace either or both of the car-

tridges as indicated.

• The LED print head may be dirty.

Using the cleaning paper, gently clean the LED print head.

• The charger may be dirty.

Your machine normally cleans the charger automatically.

If other solutions fail, please contact your authorised

Muratec dealer.

Printouts have toner smudges

• The toner may be unevenly distributed inside the toner

cartridge.

Remove the toner cartridge and shake it a few times to

redistribute the toner inside. If the problem persists, replace

the cartridge.

• The toner cartridge or drum cartridge may be defective.

Remove the cartridges and check them for damage. If the

problem persists, replace either or both of the cartridges as

indicated.

• If you find smudges on the back of the printouts, the trans-

port roller may be dirty.

Your machine normally cleans the transport roller automat-

ically. If other solutions fail, please contact your authorised

Muratec dealer.

Printouts have white spots

• The charger may be dirty.

Your machine normally cleans the charger automatically.

If other solutions fail, please contact your authorised

Muratec dealer.

ABCDE

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 53 54

Nessun commento

Muratec MFX-2500 Istruzioni per gli Interventi Pagina 44