Muratec MFX-2500 Specifiche Pagina 202
- Pagina / 453
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
3-131
4. Enter One-touch G, H, or I, depending on the kind of test. Please refer to the following table:
G: return back test
H: send from fax to PC
I: receive from PC to fax
The results are shown in the display.
If the test is successful, the display will show “OK”
If the test is failed, the display will show “NG”.
5. Press RESET to return to standby.
3.12 Line Tests
This mode offers several internal tests and ability to monitor certain unit output functions. Included are
relay tests, modem signal output monitoring, and DTMF output monitoring.
3.12.1 Relay Test
This mode tests the on/off operation of various relays and switches.
1. Press MENU, *, C.
2. Press the numeric keypad 0 (zero) to select the optional board number for the machine.
To select the optional board number for the second phone line, press 1 (one).
Then press [Enter].
3. Select “A. Relay” by cursor key, then press [Enter].
- MFX-2500 1
- Safety Information 2
- Laser Safety Label 4
- Label inside copy machine 4
- Table of Contents 6
- Section 1 8
- General Description 8
- 1.2 General specifications 9
- 1.3 Scanning specifications 12
- 1.4 Printer specifications 13
- 1.5 Memory specifications 14
- 1.6 G3 modem section 15
- 1.7 V.34 HDX modem section 15
- 1.8 Features and Functions 16
- 1.8.2 Fax Transmitting 17
- 1.8.3 Fax Receiving 18
- 1.8.4 Polling 18
- 1.8.5 Copy 19
- 1.8.6 Other features 19
- 1.9 Supply Yields 20
- 1.10 Option 21
- Section2 22
- Machine Composition 22
- 2.3 Scanning Section 30
- 2.3.2 FBS section 31
- BIS sensor 33
- APS sensor 33
- 2.4 Recording Section 35
- 2.4.2 Image Processing 36
- 3 Drive System 37
- Toner Supply Port 38
- ATDC Sensor (E1) 38
- PC Drum Driver Gear 39
- Hopper Drive Gear 39
- I/C Motor (M1) 39
- 2.4.5 PC Drum 40
- PC Drum Charge Corona 41
- Comb Electrode 41
- Grid Mesh 41
- 2.4.7 Erase Lamp 42
- 2.4.8 PH Section 43
- 2.4.8.1 PH Components 44
- 2.4.9 DEVELOPING UNIT 46
- 2.4.9.1 Sleeve/Magnet Roller 47
- Sleeve/Magnet Roller 48
- 2.4.9.3 ATDC Sensor 49
- Sub Hopper 50
- Magnet Lever 51
- 2.4.9.7 I/C Cooling Fan Motor 53
- 2.4.9.8 Ozone Fan Motor 53
- Paper Take-up Roll 54
- Tailing Edge Stop 54
- Cassette Set Sensor (PC6) 55
- Light Blocking Plate 55
- Paper Separator Pad 58
- Main Motor (M2) 60
- Synchronizing Clutch (CL1) 60
- Right Synchronizing Roller 60
- Left Synchronizing Roller 60
- Synchronizing Roller 61
- Paper Dust Remover 61
- PC Drum Protective Shutter 63
- Paper Path Center 63
- 8.5 cm 8.5 cm 63
- 2.4.14 PC DRUM CLEANING 64
- 2.4.15 FUSING UNIT 65
- 2.4.15.1 Drive Mechanism 66
- Right Fusing Roller 66
- Paper Exit Roller 66
- 2.4.15.4 CPM Control 68
- 2.4.16 PAPER EXIT UNIT 69
- Fusing Unit 70
- Fusing Cooling Fan 70
- Motor (M3) 70
- I/C (Drum Cartridge) 70
- Power Supply Unit 1 (PS1) 71
- Power Unit Cooling 71
- Fan Motor (M4) 71
- Master Board (PWB-A) 71
- Section3 72
- Software adjustment 72
- Machine Parameter A:0 74
- Machine Parameter A:1 74
- Machine Parameter A:2 75
- Machine Parameter A:7 75
- Machine Parameter B:0 76
- Machine Parameter B:1 76
- Machine Parameter B:2 77
- Machine Parameter B:3 77
- Machine Parameter B:4 78
- Machine Parameter B:5 78
- Machine Parameter B:6 79
- Machine Parameter B:7 79
- Machine Parameter B:8 80
- Machine Parameter C:0 81
- Machine Parameter D:0 81
- Machine Parameter D:1 82
- Machine Parameter D:2 82
- Machine Parameter D:3 82
- Machine Parameter D:7 83
- Machine Parameter J:0 83
- Machine Parameter J:1 84
- Machine Parameter K:0 85
- Machine Parameter K:1 85
- Machine Parameter K:2 86
- Machine Parameter K:3 86
- Machine Parameter K:4 87
- Machine Parameter K:5 87
- Machine Parameter K:6 88
- Machine Parameter K:7 88
- Machine Parameter L:0 89
- Machine Parameter L:1 89
- Machine Parameter L:2 90
- Machine Parameter L:3 90
- Machine Parameter L:4 91
- Machine Parameter L:5 91
- Machine Parameter L:6 92
- Machine Parameter L:7 92
- Machine Parameter M:0 93
- Machine Parameter M:1 93
- Machine Parameter M:2 94
- Machine Parameter M:3 94
- Machine Parameter M:4 95
- Machine Parameter M:5 95
- Machine Parameter M:6 96
- Machine Parameter M:7 96
- Machine Parameter N:0 97
- Machine Parameter N:1 97
- Machine Parameter N:2 98
- Machine Parameter N:3 98
- Machine Parameter N:4 99
- Machine Parameter N:5 99
- Machine Parameter N:6 100
- Machine Parameter N:7 100
- Machine Parameter O:0 101
- Machine Parameter O:1 101
- Machine Parameter O:2 102
- Machine Parameter O:3 102
- Machine Parameter O:4 103
- Machine Parameter O:5 103
- Machine Parameter O:6 104
- Machine Parameter O:7 104
- Machine Parameter P:0 105
- Machine Parameter P:1 105
- Machine Parameter P:2 106
- Machine Parameter P:3 106
- Machine Parameter P:4 107
- Machine Parameter P:5 107
- Machine Parameter P:6 108
- Machine Parameter P:7 108
- Machine Parameter Q:0 109
- Machine Parameter Q:1 109
- Machine Parameter Q:2 110
- Machine Parameter Q:3 110
- Machine Parameter Q:4 111
- Machine Parameter Q:5 111
- Machine Parameter Q:6 112
- Machine Parameter Q:7 112
- Machine Parameter R:0 113
- Machine Parameter R:1 113
- Machine Parameter R:2 114
- Machine Parameter R:3 114
- Machine Parameter R:4 115
- Machine Parameter R:5 115
- Machine Parameter R:6 116
- Machine Parameter R:7 116
- Machine Parameter S:0 117
- Machine Parameter S:1 117
- Machine Parameter S:2 118
- Machine Parameter S:3 118
- Machine Parameter S:4 119
- Machine Parameter S:5 119
- Machine Parameter S:6 120
- Machine Parameter S:7 120
- Machine Parameter T:0 121
- Machine Parameter T:1 121
- Machine Parameter T:2 122
- Machine Parameter T:3 122
- Machine Parameter T:4 123
- Machine Parameter T:5 123
- Machine Parameter T:6 124
- Machine Parameter T:7 124
- Machine Parameter U:0 125
- Machine Parameter U:1 125
- Machine Parameter U:2 126
- Machine Parameter U:3 126
- Machine Parameter U:4 127
- Machine Parameter U:5 127
- Machine Parameter U:6 128
- Machine Parameter U:7 128
- Machine Parameter V:0 129
- Machine Parameter V:1 129
- Machine Parameter V:2 130
- Machine Parameter V:3 130
- Machine Parameter V:4 131
- Machine Parameter V:5 131
- Machine Parameter V:6 132
- Machine Parameter V:7 132
- Machine Parameter W:0 133
- Machine Parameter W:1 133
- Machine Parameter W:2 134
- Machine Parameter W:3 134
- Machine Parameter W:4 135
- Machine Parameter W:5 135
- Machine Parameter W:6 136
- Machine Parameter W:7 136
- Machine Parameter X:0 137
- Machine Parameter X:1 137
- Machine Parameter X:2 138
- Machine Parameter X:3 138
- Machine Parameter X:4 139
- Machine Parameter X:5 139
- Machine Parameter X:6 140
- Machine Parameter X:7 140
- Machine Parameter Y:0 141
- Machine Parameter Y:1 141
- Machine Parameter Y:2 142
- Machine Parameter Y:3 142
- Machine Parameter Y:4 143
- Machine Parameter Y:5 143
- Machine Parameter Y:6 144
- Machine Parameter Y:7 144
- Machine Parameter Z:0 145
- Machine Parameter Z:1 145
- Machine Parameter Z:2 146
- Machine Parameter Z:3 146
- Machine Parameter Z:5 147
- Machine Parameter Z:4 147
- Machine Parameter Z:6 148
- Machine Parameter Z:7 148
- Scanner Adjustment 149
- Printing position Adjustment 149
- 3.3 Memory Switch Adjustment 150
- Memory Switch A:0 - Dialer 151
- Memory Switch A:1 - Dialer 151
- Memory Switch A:2 - Dialer 152
- Memory Switch A:5 - Dialer 152
- Memory Switch C:0 - Reception 156
- Memory Switch C:1 - Reception 157
- Memory Switch D:0 - Modem 158
- Memory Switch D:1 - Modem 158
- Memory Switch D:2 - Modem 159
- Memory Switch D:3 - Modem 159
- Memory Switch E:0 - Scanner 160
- Memory Switch H:0 - Operation 166
- Memory Switch H:1 - Operation 166
- Memory Switch H:2 - Operation 167
- 3.5 All RAM Clear 168
- 3.7 Unique Switch Adjustment 171
- Unique Switch a:0 — Dialer 172
- Unique Switch c:0 - Reception 175
- Unique Switch c:1 - Reception 176
- Unique Switch c:2 - Reception 177
- Unique Switch c:3 - Reception 177
- Unique Switch d:0 - Modem 178
- Unique Switch d:1 - Modem 178
- Unique Switch d:2 - Modem 179
- Unique Switch d:7 - Modem 179
- Unique Switch e:0 - Scanner 180
- Unique Switch e:1 180
- Unique Switch e:2 180
- e:5 --- Factory use only 180
- Unique Switch e:6 - Scanner 181
- Unique Switch e:7 - Scanner 181
- Unique Switch e:8 - Scanner 182
- Unique Switch e:9 - Scanner 183
- Unique Switch f:0 - Printer 184
- Unique Switch f:1 - Printer 184
- Unique Switch f:2 - Printer 185
- Unique Switch f:3 — Printer 185
- Unique Switch f:4 185
- f:7 --- Factory use only 185
- Unique Switch f:8- Printer 186
- Unique Switch h:0 - Operation 189
- Unique Switch h:1 - Operation 189
- Unique Switch h:3 - Operation 190
- Unique Switch h:4 - Operation 190
- Unique Switch h:5 - Operation 191
- Unique Switch i:8 192
- j:9 --- Factory use only 192
- 3.8 Print Program Mode List 193
- 3.9 Test Modes 193
- 3.9.2 Printer Test 194
- 3.9.3 Stamp Test 195
- Unique Switch Settings 196
- 3.11 Factory Functions 196
- 3.11.1 Function List 197
- 3.11.2 LED Test 197
- 3.11.3 LCD Test 197
- 3.11.4 Panel Test 198
- 3.11.5 SRAM Check 199
- 3.11.6 DRAM Check 199
- Check area: 200
- 3.11.9 Page memory check 201
- 3.11.10 RS-232C Test 201
- 3.12 Line Tests 202
- 3.12.2 Tonal Signal Test 203
- 3.12.3 DTMF Output Test 205
- 3.14 Consumable order sheet 207
- 3.15 DRAM Clear 210
- 3.16 Clear Life Monitor 211
- 3.17 Set Service Code 211
- 3.18 Printer Trouble Reset 212
- 3.19 Clear Optional Data 212
- 3.20 JP1, JP2 Battery Backup 212
- 3.21 Update the software 213
- Error code 214
- Section4 215
- Troubleshooting Procedures 215
- 4.2 Document Feeder Jam 216
- 4.4 Mirror Carriage Error 216
- 4.5 Transmit Error 217
- 4.6 Transmit Black Lines 217
- 4.7 Cannot transmit 217
- 4.8 Receive Errors 217
- 4.9 Will not Auto-Answer 218
- 4.10 Recording paper misfeed 219
- (Paper feed unit) 226
- (Duplex unit) 231
- 4.11 Error Codes 233
- Transmission errors 234
- Communication Error Messages 235
- 4.12 Service Call Error 236
- (Paper Feed Unit) 244
- 4.13 Image Failure 249
- <Image Failure Samples> 251
- Section5 258
- Maintenance & Adjustment 258
- 5.1 Maintenance schedule 259
- Separator Gear 263
- Inner guide C 264
- Guide supporter A 264
- Inner guide A 264
- Retard roller assembly 264
- White plate 266
- Contact glass 266
- FBS glass 266
- Stamp assembly 267
- Stamp cover 267
- 5.1.3 Image Transfer Section 268
- 5.1.4 Developing Section 270
- 5.1.5 Fusing Section 271
- 5.2 Re/Disassemble 275
- Tx cover 277
- Release lever 278
- Interlock switch 279
- Press roller 280
- Retard bracket 281
- Retard cap 281
- 5.2.9 Platen top cover 282
- 5.2.10 Tx side cover 283
- 5.2.11 PCB Connect ADF 283
- 5.2.12 BIS sensor 284
- Thick springThin spring 285
- ADF motor 285
- Feed pulley A 286
- Gear 18/30 286
- 5.2.15 Inner guide A assembly 287
- 5.2.16 Feed roller assembly 288
- 5.2.17 Platen cover assembly 289
- Hinge spacer 289
- Platen cover assembly 289
- Hinge bracket 291
- Spring lock washer 291
- Document mount assembly 291
- 5.2.19 Feed roller assembly 292
- Hinge bracket A 293
- Hinge assembly L 293
- Inner guide D 294
- Pulley flange A 295
- Pulley bracket 295
- Feed roller assembly 295
- 5.2.20 Press roller C 296
- Outer guide D 296
- Press roller C assemblies 296
- 5.2.21 Lock lever assembly 297
- Spring attachment 297
- Lock lever assembly 298
- 5.2.22 DADFA3, DADFLEG Sensor 299
- 5.2.24 Panel assembly 300
- 5.2.25 One-touch panel 300
- 5.2.26 PCB Panel 301
- 5.2.27 PCB Panel 301
- 5.2.28 Speaker 302
- 5.2.29 PCB LCDBL 302
- Mirror carriage End sensor 303
- 5.2.31 APS sensor 303
- 5.2.32 Panel lower cover 304
- 5.2.33 FBS glass 304
- 5.2.34 FBS Pad 305
- 5.2.35 Contact glass 305
- 5.2.36 Multi beam sensor 306
- 5.2.37 Inverter 307
- 5.2.38 PCB AFE 308
- 5.2.39 Exposure lamp 309
- Mirror carriage A 310
- Mirror clamp 311
- Mirror A 311
- FPC guide 312
- FPC bracket 312
- Belt retainer 312
- Mirror carriage B 312
- 5.2.43 Mirror B and C 313
- 5.2.45 FBS motor 315
- FBS motor bracket 316
- FBS motor 316
- 5.2.46 PCB Scanner 317
- 5.2.47 Rear cover (upper) 318
- 5.2.48 Rear cover (lower) 319
- 5.2.49 Shield plate 320
- 5.2.50 PCB Main 321
- 5.2.51 PCB NCU 322
- 5.2.52 Front cover 323
- 5.2.53 LED cover 324
- 5.2.54 Upper cover 324
- Shield box 325
- 5.2.56 Left cover 326
- 5.2.57 PU1 326
- 5.2.58 PCB Modular 327
- 5.2.59 Main switch 327
- 5.2.60 Master board (PWB-A) 328
- PU1 mounting bracket aseembly 333
- HV1 cover 335
- 5.2.68 PH unit 336
- 5.3 Adjustment 338
- Adjustment procedure 339
- 5.3.3 FBS registration (top) 340
- 5.3.4 FBS registration (side) 341
- 5.3.5 ADF registration (top) 342
- Test Chart No.99-2 343
- B at the incorrect position 348
- Left cover 353
- Section6 355
- 6.1 Memory Upgrade 356
- Upgrade memory board 357
- 6.2 Telephone Handset 358
- 6.2.2 Adjusting handset 359
- Attaching a second phone 360
- 6.3 Mechanical Page 361
- 6.4 PAPER FEED UNIT 363
- 6.4.1.1 SPECIFICATIONS 364
- 6.4.1.2 PARTS IDENTIFICATION 364
- Paper take-up 365
- Paper lifting plate 366
- Paper lifting spring 366
- Cassette set switch S1 367
- Paper near empty 368
- Actuator 368
- Paper empty sensor S4 369
- 6.4.1.6.8 Paper Take-Up Roll 371
- Lock point 373
- Front side 375
- Synchronizing roller 376
- From the 378
- 6.5 Large Capacity Cassette 379
- 6.5.1.1 Specifications 380
- 6.5.1.2 Part Identification 380
- 6.5.1.3 Cross-Sectional View 381
- 6.5.1.4 Drive System 381
- 6.5.1.6 Mechanical Operations 383
- Registration sensor RSEN 386
- Vertical transport roller 386
- Lift 2 Lift 1 386
- Start Key ON 389
- Standby Position 389
- Feed roll 390
- 1st sheet of paper 390
- 2nd sheet of paper 390
- Separator roll 390
- Stationary 390
- Pressure release rail 391
- 6.5.1.6.8 Paper Size Setting 392
- One-way gears 393
- LCC lift-up motor 393
- Couplings 393
- Paper near empty sensor 1/2 396
- Paper dehumidifying heaters 397
- 6.5.2.1 Disassembly 398
- Roller/Rolls 403
- 6.5.2.2 Adjustment 404
- 6.5.3.1 Misfeed Detection 404
- 6.5.3.2 Malfunction Detection 406
- LCC main board 407
- 6.6 2-Bin/Shift Tray Unit 408
- 6.6.1.1 Specifications 409
- 6.6.1.2 Part Identification 410
- 6.6.1.3 Cross-Sectional View 411
- <2-Bin tray> 412
- <Shift tray> 412
- Paper exit roller 415
- Transport motor M1 415
- Options 2-Bin/Shift Tray 418
- (2) Shift Tray 418
- 6.6.1.6.4 Initial Operation 420
- 6.6.2.1 Disassembly 422
- 6.6.2.2 Adjustment 423
- 6.6.3 TROUBLESHOOTING 424
- Control board 426
- 6.7 Duplex Unit 428
- 6.7.1.1 Specifications 429
- 6.7.1.2 Parts Identification 430
- 6.7.1.3 Cross-Sectional View 430
- 6.7.1.4 Drive System 431
- 6.7.1.6 Mechanical Operations 432
- Step 1 Step 2 434
- Step 4 Step 5 434
- Step 4 Step 5 Step 6 436
- 6.7.2.1 Disassembly 437
- 6.7.2.2 ADJUSTMENT 439
- 6.7.3 MISFEED DETECTION 440
- Duplex main board 441
- 6.8 Second phone line 442
- 6.8.1.1 Unpacking 443
- PCB bracket 444
- Cable clamp 444
- Spacer (short) 444
- Spacer (long) 444
- Modem PCB 445
- 6.8.3 Adjustment 447
- Setting the Unique Switches 448
- Unique Switch d:2 – Modem 449
- Unique Switch d:7 – Modem 449
- 6.9 RS-232C Interface 450
- 6.9.1.1 Unpacking 451
- 6.9.2 RS-232C Test 453
- 9.6.3 Adjustment 453
Prodotti e manuali riguardandi Apparecchi multifunzione Muratec MFX-2500
Apparecchi multifunzione Muratec F-320 Guida Utente
(122 pagine)
(122 pagine)
Apparecchi multifunzione Muratec F-565 Guida Utente
(204 pagine)
(204 pagine)
Apparecchi multifunzione Muratec F-565 Specifiche
(383 pagine)
(383 pagine)
Apparecchi multifunzione Muratec MFX-1200 Specifiche
(205 pagine)
(205 pagine)
Apparecchi multifunzione Muratec F-360 Specifiche
(290 pagine)
(290 pagine)
Apparecchi multifunzione Muratec MFX-2590 Specifiche
(279 pagine)
(279 pagine)
(193 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.122 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale